Quick Hits

Episode 4: Cable Trays & Limited-Energy Systems (723.40)

SLIDE 1 (HOOK / COVER) ⚡ NEC Quick Hit: Cable Trays for Limited-Energy Systems (Part 4) ⚡

Ladder trays, basket trays, and solid-bottom systems—how do cable trays fit into Article 723 low-voltage pathways? Let's finish Article 723! 👇

SLIDE 2 (CABLE TRAY TYPES & MATERIALS) Metal & Nonmetallic Cable Trays:

• General Approval: Limited-energy cables and communications raceways are permitted to be installed in metal or listed nonmetallic cable tray systems.

• Nonmetallic Trays: Nonmetallic cable trays must be listed for limited-energy installations and comply with fire spread requirements under Section 723.2.

SLIDE 3 (LADDER TRAYS & ROUTING ASSEMBLIES) Combining Cable Trays & Routing Assemblies:

• Ladder Cable Trays: Explicitly permitted under Section 723.40(B) to support listed cable routing assemblies!

• Solid Bottom Trays: Solid-bottom metal cable trays with solid metal covers allow Plenum, Riser, and General-Purpose communications raceways to be routed safely indoors.

SLIDE 4 (WRAP-UP) 💡 Apprentice Pro-Tip:

Ladder trays provide excellent continuous support for structured cabling pathways while maintaining maximum airflow. Just ensure you observe cable tray load limits and maintain physical separation from high-voltage power lines!

💬 Save this post for your final code review on limited-energy pathways! 🔗 

More code breakdowns and study tools at www.JoshTheSparky.com

← View Chapter 7 Home

← Back To Article 722 Home

← Back To Quick Hits Home